Surface Disinfection: To clean, spray PREempt RTU and wipe surface removing any dirt or organic matter for 30 seconds. To disinfect, thoroughly spray PREempt RTU on surface. LEAVE SURFACE WET FOR 3 MINUTES. After 3 minutes wipe dry with disposable paper towel. Discard used paper towel.
Disinfecting Non-Circulating Foot Baths: Take apart and remove jets and filters. Clean parts, tub & chair with PREempt RTU for 30 seconds. Use scrubbing action. Rinse parts and tub, and wipe dry. Use PREempt RTU to wet surfaces of jets/ filter, tub & chair. Wait 3 minutes for disinfection contact time. Rinse and wipe dry, if necessary. Replace jets and lter parts.
View print friendly PDFs: Surfaces | Non-Circulating Foot Baths
